This repo covers external interrupts on the ATmega328, including INT0, INT1, and Pin Change Interrupts (PCINT).

Multi-sensor data logging system using STM32F103C8T6. Reads DS18B20 temperature and MPU6050 accelerometer/gyroscope data, stores readings in W25Q64 flash using circular buffer architecture. Features non-blocking sector erase, 16x2 LCD display with mode switching, and UART export in formatted tables.

University course: Embedded Systems

A real-time clock (RTC) that show the current time

Frequency generator is an embedded systems project using 8051 microcontroller with code written in c, proteus simulation and hardware circuit

Implementations of basic components like timers, LCD displays, external interrupts, and digital pins on the STM32F103R6 microcontroller, demonstrating fundamental embedded system concepts.

A repository for holding end users code and guides for implementing an ARDUINO External Interrupt Framework

SW for HW Interface course labs

My simon-game project that is written in C language for the AVR ATMEGA32 microcontroller.

Drivers for ATmega32 peripherals designed for modular embedded system development.

5 floor single elevator controller.

Toggle LEDs by external interruptions

SMT160 digital temperature sensor reading by AVR microcontroller

An example showing how external interrupts work. Pushing a button triggers the blinking of a LED.

STM32F4 example projects demonstrating ADC, timer-based ADC, push button handling (polling and interrupt), digital read, external interrupts, LED blinking, PWM, and DC motor control.

This project demonstrates using **hardware interrupts** on the Raspberry Pi Pico W to toggle the on-board LED when a push button is pressed.

Developing a system that controls the stop-watch time and displays it on 7-segments.

Traffic lights are signaling devices positioned at road intersections, pedestrian crossings, and other locations to control the flow of traffic.

This project demonstrates how to use an **External Interrupt (EXTI)** to control an LED using a **push button** on the STM32F446RE Nucleo board.

This project demonstrates how to configure and handle **external interrupts (INT0 & INT1)** on the **ATmega328P** at the register level, without using Arduino functions.